Whether or not you are upgrading your graphics card or troubleshooting an issue, understanding the right way to take away it safely and effectively is crucial. Graphic playing cards are delicate elements, so it is necessary to take care when dealing with them. On this information, we’ll stroll you thru the step-by-step strategy of eradicating a graphics card out of your pc, making certain that you just do it with out inflicting any injury.
Earlier than you start, energy down your pc and unplug it from the ability outlet. This can forestall any electrical shocks or injury to the elements. Subsequent, open your pc case and find the graphics card. It would usually be put in in a PCI Specific (PCIe) slot on the motherboard. As soon as you have discovered the graphics card, you will must launch the retaining clip that holds it in place. The clip is often situated on the finish of the PCIe slot, and it may be launched by urgent down on it or sliding it to the aspect.
As soon as the retaining clip is launched, you may fastidiously pull the graphics card straight up and out of the PCIe slot. Make sure to help the cardboard along with your different hand to stop it from bending or breaking. If the cardboard is caught, don’t drive it. As a substitute, verify to make it possible for the entire retaining clips are launched and that there are not any cables or different obstructions stopping the cardboard from being eliminated. With the graphics card eliminated, now you can proceed along with your improve or troubleshooting.
Eradicating the Screws
The subsequent step in eradicating your graphics card is to find and take away the screws which might be holding it in place. These screws are usually situated on the again of the cardboard, close to the I/O panel. They’re often small, Phillips-head screws, however they might differ relying on the make and mannequin of your graphics card. To take away the screws, you have to a small Phillips-head screwdriver.
After getting situated the screws, fastidiously unscrew them. Make sure to help the graphics card along with your different hand as you do that, in order that it doesn’t fall out of the slot. As soon as the screws are eliminated, you may gently pull the graphics card straight out of the PCIe slot. Watch out to not bend or injury the cardboard as you do that.
| Screw Location | Screw Sort | Screwdriver Required |
|---|---|---|
| Again of the graphics card, close to the I/O panel | Phillips-head screw | Phillips-head screwdriver |
Extra ideas for eradicating the screws:
- In case you are having hassle eradicating the screws, attempt utilizing a magnetic screwdriver. This can assist to maintain the screws from falling out as you unscrew them.
- Watch out to not overtighten the screws whenever you reinstall the graphics card. This may injury the cardboard or the motherboard.
- In case you lose any of the screws, you may often discover replacements at your native ironmongery shop.
Pulling the Card Out
As soon as the cardboard is unlocked, you may fastidiously pull it out of the motherboard slot. To do that, grasp the cardboard by the highest and backside edges and gently rock it backwards and forwards till it comes free. Don’t pull on the cardboard by the wires or connectors, as this might injury them.
As soon as the cardboard is free, raise it straight up and out of the slot. Watch out to not bend or injury the cardboard as you take away it.
Listed below are some further ideas for pulling the cardboard out:
- If the cardboard is caught, don’t drive it. Gently rock it backwards and forwards till it comes free.
- Don’t contact the gold contacts on the cardboard.
- In case you are having hassle eradicating the cardboard, you should use a small flat-head screwdriver to softly pry it out of the slot.
As soon as the cardboard is eliminated, you may retailer it in an anti-static bag till you’re prepared to put in it in one other pc.
Cleansing the Slot
As soon as you have eliminated your graphics card, it is a good suggestion to scrub the slot it was put in in. Over time, mud and particles can construct up within the slot, which might trigger issues with the connection between your graphics card and your motherboard. To wash the slot, use a tender, dry material or a compressed air can. Watch out to not injury the slot or its elements.
If the slot is especially soiled, chances are you’ll want to make use of a cotton swab dipped in isopropyl alcohol to scrub it. Make sure to let the alcohol dry utterly earlier than reinserting your graphics card.
Extra Ideas for Cleansing the Slot
- Use a flashlight to examine the slot for any particles or injury.
- In case you’re utilizing a compressed air can, maintain it upright and spray briefly bursts. Keep away from spraying immediately into the slot.
- In case you’re utilizing a cotton swab dipped in isopropyl alcohol, you’ll want to wring out the swab earlier than inserting it into the slot.
- Let the alcohol dry utterly earlier than reinserting your graphics card.
How To Take away Graphic Card
Earlier than you start, energy down your pc and unplug it from the ability outlet. You will additionally must discharge any static electrical energy by touching a steel object like a doorknob or radiator.
Subsequent, find the graphics card. It would often be the biggest card in your pc, and it’ll have a variety of ports on the again for connecting displays. As soon as you have discovered the graphics card, you can begin eradicating it.
To take away the graphics card, first take away the screws which might be holding it in place. There’ll often be two or three screws, situated on the again of the pc. As soon as the screws are eliminated, you may gently pull the graphics card straight out of the slot.
If the graphics card is caught, chances are you’ll want to make use of a screwdriver to softly pry it free. Watch out to not injury the graphics card or the motherboard.
As soon as the graphics card is eliminated, you may disconnect the ability cables from the again of the cardboard. There’ll often be one or two energy cables, relying on the kind of graphics card.
Now you may set up your new graphics card. To do that, merely insert the brand new card into the slot on the motherboard and tighten the screws. Then, join the ability cables to the again of the cardboard. Lastly, energy in your pc and set up the drivers to your new graphics card.
