You will need to be certain that your automobile’s cigarette lighter is operational, as it may be a helpful amenity for charging digital gadgets or powering different equipment. Nevertheless, if the cigarette lighter just isn’t working, it may very well be on account of a blown fuse.
Changing a cigarette lighter fuse is a comparatively easy activity that may be accomplished in a couple of minutes. Nevertheless, you will need to comply with the proper steps to keep away from any electrical hazards. First, you’ll need to establish the situation of the cigarette lighter fuse in your automobile. This info can normally be present in your automobile’s proprietor’s handbook.
After you have positioned the cigarette lighter fuse, you’ll need to take away it from the fuse field. Most fuse packing containers have a small software that can be utilized to take away fuses. As soon as the fuse has been eliminated, you’ll be able to examine it to see whether it is blown. A blown fuse could have a break within the wire that runs by way of the middle of the fuse. If the fuse is blown, you’ll need to exchange it with a brand new fuse of the identical amperage.
Disconnect the Battery
Supplies you may want:
- Wrench or socket set
- New fuse
Steps:
- Find the battery in your automobile. It is normally beneath the hood, however will also be within the trunk or beneath the seats.
- Disconnect the damaging battery terminal by loosening the bolt or nut that holds it in place. Use a wrench or socket set to do that.
- As soon as the damaging terminal is disconnected, you’ll be able to safely take away the fuse panel cowl. The fuse panel is normally positioned beneath the dashboard or within the glove compartment.
Take away the Fuse
As soon as you’ve got positioned the fuse field, you may must take away the fuse that is related to the cigarette lighter. To do that, you may want to make use of a fuse puller. A fuse puller is a small software that is designed to securely take away fuses from their sockets. To make use of a fuse puller, merely insert the ideas of the software into the slots on both aspect of the fuse. Then, gently pull the fuse puller in the direction of you to take away the fuse from its socket.
If you do not have a fuse puller, it’s also possible to use a pair of needle-nose pliers to take away the fuse. To do that, merely grasp the fuse with the pliers and gently pull it straight up out of its socket.
As soon as you’ve got eliminated the fuse, you may want to examine it to see if it is blown. A blown fuse could have a damaged filament. If the fuse is blown, you may want to exchange it with a brand new fuse of the identical amperage.
Fuse Alternative and Amperage Information
| Fuse Amperage | Utility |
|---|---|
| 5 Amp | Cigarette lighter |
| 10 Amp | Energy home windows |
| 15 Amp | Radio |
| 20 Amp | Headlights |
Change the Fuse
To switch the fuse, you’ll need the next instruments:
- A brand new fuse of the proper amperage
- A small flathead screwdriver
After you have gathered your instruments, comply with these steps:
1. Disconnect the damaging battery terminal
This can forestall any electrical shock when you are engaged on the fuse.
2. Find the fuse field
The fuse field is normally positioned beneath the dashboard on the motive force’s aspect. Will probably be a small black field with a lid that claims “FUSES.” Open the lid to disclose the fuses.
3. Discover the fuse for the cigarette lighter
The fuse for the cigarette lighter will likely be labeled “CIGAR LIGHTER” or “POWER OUTLET.” Will probably be a small, rectangular fuse with a metallic strip working throughout the highest. The amperage of the fuse will likely be printed on the highest.
4. Take away the outdated fuse
Use the flathead screwdriver to softly pry the outdated fuse out of the fuse field. Watch out to not contact the metallic contacts on the fuse.
5. Insert the brand new fuse
Insert the brand new fuse into the fuse field in the identical orientation because the outdated fuse. Be sure that the metallic contacts on the fuse are making good contact with the terminals within the fuse field.
6. Take a look at the cigarette lighter
Reconnect the damaging battery terminal and begin the automotive. The cigarette lighter ought to now be working. If it isn’t, verify the fuse once more to be sure that it’s put in appropriately.
Reconnect the Battery
1. Open the hood and find the battery. It is normally a black field with metallic terminals on high.
2. Disconnect the damaging terminal first. That is necessary for security, because it prevents unintended sparks.
3. Disconnect the constructive terminal.
4. Find the fuse field. It is a small, plastic field normally discovered close to the battery.
5. Open the fuse field cowl. There ought to be a diagram inside that exhibits you which ones fuse is for the cigarette lighter.
6. Fastidiously take away the blown fuse. You should use your fingers or needle-nose pliers.
7. Examine the brand new fuse to ensure it is the proper sort and amperage.
8. Insert the brand new fuse into the empty socket. Be sure it is seated securely.
9. Shut the fuse field cowl.
10. Reconnect the constructive terminal.
11. Reconnect the damaging terminal.
12. Shut the hood.
Take a look at the Cigarette Lighter
Earlier than changing the fuse, it is important to confirm that the cigarette lighter itself is defective. Observe these steps to check it:
1. Insert a functioning cigarette lighter or digital gadget into the socket.
2. Press the button to activate the lighter.
3. If the lighter does not ignite or the gadget does not obtain energy, it signifies a possible situation with the fuse or wiring.
4. If the lighter ignites or the gadget powers up, the cigarette lighter meeting is probably going functioning appropriately, and the issue might lie elsewhere within the electrical system.
Further Troubleshooting Steps
1. Examine the cigarette lighter socket for any seen harm, corrosion, or particles.
2. If doable, use a multimeter to measure the voltage on the socket pins. A studying of 12 volts signifies that energy is current.
3. Examine the wiring harness linked to the cigarette lighter for any breaks, shorts, or free connections.
4. Confirm that the fuse field is definitely accessible and that the cigarette lighter fuse just isn’t blown.
5. If all different steps fail, seek the advice of a professional electrician or automotive mechanic for additional analysis and restore.
Take away and Examine the Fuse
Utilizing the fuse puller, rigorously take away the outdated fuse. Examine it intently to see if it is blown. A blown fuse could have a damaged filament, indicating {an electrical} fault.
Insert a New Fuse
Deal with the brand new fuse with care, avoiding touching the metallic components. Insert the brand new fuse into the fuse holder, guaranteeing it matches snugly and makes good contact.
Examine if the Fuse Blows Instantly
After changing the fuse, activate the cigarette lighter or accent. If the fuse blows instantly, there could also be a extra critical electrical situation that must be addressed.
Troubleshooting Frequent Points
No Energy to the Cigarette Lighter or Accent
If the fuse just isn’t blown and the cigarette lighter or accent nonetheless does not work, verify the next:
- The facility supply (e.g., battery or alternator)
- The wiring connections to the cigarette lighter or accent
- The cigarette lighter or accent itself
Fuse Blows Repeatedly
If the fuse blows repeatedly, it signifies {an electrical} fault. Examine the next:
- The cigarette lighter or accent for any harm or shorts
- The wiring harness for any pinched or frayed wires
- {The electrical} system for any overloads or malfunctions
Fuse Melted or Deformed
A melted or deformed fuse signifies a major electrical fault. Instantly disconnect the battery and search skilled help to diagnose and restore the problem.
| Fuse Score | Dimension |
|---|---|
| 10 Amp | ATO |
| 15 Amp | ATE |
| 20 Amp | ATC |
Security Precautions
Earlier than you start, it is important to take the next security precautions to keep away from any potential hazards or accidents:
1. All the time park your automobile on a stage floor and interact the parking brake to forestall it from rolling.
2. Flip off the engine and take away the important thing from the ignition.
3. Shield your fingers by sporting gloves to keep away from any cuts or burns in the course of the course of.
4. Use a flashlight or work mild to light up the fuse field for higher visibility.
5. In case you encounter any difficulties or uncertainties, don’t hesitate to hunt skilled help from a professional mechanic or electrician.
6. By no means try to exchange a fuse with one in every of a unique amperage score, as this will result in electrical harm.
7. Change the fuse promptly to keep away from additional electrical points or hazards.
8. Get rid of the outdated fuse correctly at a delegated electronics recycling middle.
9. **Double-Examine the Wiring Harness:** Earlier than changing the fuse, take a more in-depth have a look at the wiring harness connecting to the cigarette lighter. Examine it for any seen harm, reminiscent of frayed wires or free connections. In case you discover any irregularities, it is essential to resolve these points earlier than putting in the brand new fuse. Free connections can result in brief circuits and additional electrical issues, whereas frayed wires pose a hearth hazard. Tighten any free connections and restore broken wires utilizing electrical tape or solder, guaranteeing a safe and dependable connection.
10. Examine for Different Electrical Points: As soon as the cigarette lighter fuse has been changed, take a while to look at the opposite electrical techniques in your automobile. Activate the headlights, radio, and different equipment to make sure they’re functioning appropriately. In case you encounter any issues, it might point out an underlying electrical situation that requires additional consideration. Promptly deal with any electrical considerations to forestall extra extreme issues from creating.
The best way to Change Cigarette Lighter Fuse
1. Collect Your Instruments
You will want a couple of primary instruments to exchange the cigarette lighter fuse:
- A brand new fuse that’s the identical amperage because the outdated one
- A pair of needle-nose pliers
- A flashlight
2. Find the Fuse Field
The fuse field is normally positioned beneath the dashboard, on the motive force’s aspect. Seek the advice of your automobile’s proprietor’s handbook for the precise location.
3. Establish the Cigarette Lighter Fuse
After you have positioned the fuse field, you might want to establish the cigarette lighter fuse. It’s normally labeled “CIGAR” or “ACC.” If you cannot discover the label, seek the advice of your automobile’s proprietor’s handbook for the proper fuse location.
4. Take away the Outdated Fuse
Use the needle-nose pliers to softly pull the outdated fuse out of its socket.
5. Insert the New Fuse
Push the brand new fuse into the socket till it clicks into place.
6. Take a look at the Cigarette Lighter
Activate the ignition and attempt to use the cigarette lighter. If it really works, you’ve gotten efficiently changed the fuse.
Further Ideas
7. Use the Proper Amperage Fuse
You will need to use the proper amperage fuse on your cigarette lighter. In case you use a fuse that’s too low, it is going to blow out each time you utilize the cigarette lighter. In case you use a fuse that’s too excessive, it might trigger harm to your automobile’s electrical system.
8. Examine for Different Issues
You probably have changed the fuse and the cigarette lighter nonetheless does not work, there could also be one other downside. Examine the wiring for any free connections or harm.
9. Use a Flashlight
If you’re having bother seeing contained in the fuse field, use a flashlight that will help you.
10. Fuse Info
| Fuse Amperage | Fuse Kind | Fuse Location |
|---|---|---|
| 15A | Mini | Below the dashboard, driver’s aspect |
| 20A | Mini | Below the dashboard, driver’s aspect |
| 25A | Mini | Below the dashboard, driver’s aspect |
The best way to Change a Cigarette Lighter Fuse
In case your automotive’s cigarette lighter is not working, the fuse might have blown. This is a step-by-step information on how you can change the fuse:
-
Find the fuse panel. It is normally positioned beneath the dashboard on the motive force’s aspect. Consult with your automotive’s proprietor’s handbook for the precise location.
-
Discover the cigarette lighter fuse. It is normally labeled as “CIG” or “12V POWER OUTLET.” If you cannot discover it, verify your proprietor’s handbook for the fuse diagram.
-
Pull out the blown fuse. Use a fuse puller or needle-nose pliers to softly grasp the fuse and pull it straight out.
-
Insert a brand new fuse. Be sure the brand new fuse is identical amperage because the blown fuse. Consult with your proprietor’s handbook for the proper amperage.
-
Take a look at the fuse. Activate the cigarette lighter and confirm that it is working.
Individuals Additionally Ask
How do I do know if the cigarette lighter fuse is blown?
In case your cigarette lighter is not working, verify the fuse first. A blown fuse could have a damaged wire inside.
The place can I discover the fuse diagram for my automotive?
The fuse diagram is normally positioned in your automotive’s proprietor’s handbook. It exhibits the situation of every fuse and its amperage.
Can I change the fuse myself?
Sure, changing a fuse is a straightforward DIY activity. Simply comply with the steps outlined above.
