Adjusting the time in your Armitron watch is an easy process that may be accomplished in just a few straightforward steps. Whether or not you are setting the time for the primary time or just adjusting it for daylight saving time, following these directions will make sure that your watch is all the time displaying the proper time. Earlier than you start, just be sure you have a small, pointed object, equivalent to a pen or a toothpick, available. Additionally, you will have to know the proper time, both by a dependable time supply or through the use of a timekeeping app in your cellphone.
First, find the small button on the facet of your watch. This button is normally positioned close to the two o’clock or 4 o’clock place. Upon getting discovered the button, press and maintain it down for just a few seconds. This can trigger the second hand to cease shifting and the digital show to begin flashing. Subsequent, use the pointed object to regulate the hour and minute fingers to the proper time. Watch out to not overwind the fingers, as this could injury the watch. Upon getting set the proper time, launch the button and the watch will begin working once more.
In case your Armitron watch has a digital show, the method for adjusting the time is barely totally different. First, press the “Mode” button till you attain the timekeeping mode. Then, use the “Up” and “Down” buttons to regulate the hour and minute digits. Upon getting set the proper time, press the “Mode” button once more to exit the timekeeping mode. Your watch will now be displaying the proper time.
Setting the Time Manually
To set the time manually in your Armitron watch, comply with these steps:
- Find the crown: The crown is the small knob on the facet of the watch case. It’s normally positioned on the 3 o’clock place.
- Pull out the crown: Gently pull the crown out to the primary place. This can cease the watch from working.
- Flip the crown: Flip the crown clockwise or counterclockwise to regulate the hour and minute fingers. Be aware that some Armitron watches have a separate hand for seconds, which may be adjusted by turning the crown in a distinct route.
- Push the crown again in: As soon as the time is ready, push the crown again into the watch case. The watch will begin working once more.
| Crown Place | Perform |
|---|---|
| Regular | Working |
| Pulled out one click on | Cease working, modify hour and minute fingers |
Utilizing the Digital Crown
Adjusting the time on an Armitron watch with a digital crown is an easy course of. Earlier than you start, make sure that the watch is in time mode by urgent the corresponding button.
1. Find the digital crown located on the facet of the watch. It’s normally a small, protruding knob or wheel.
2. Gently flip the crown **clockwise** to **advance the hour hand** by one hour. Flip the crown **counterclockwise** to **lower the hour hand** by one hour.
3. As soon as the proper hour is ready, pull out the crown one degree (some fashions require two ranges).
4. Flip the crown **clockwise** to **advance the minute hand** by one minute. Flip the crown **counterclockwise** to **lower the minute hand** by one minute.
5. As soon as the proper minutes are set, push the crown again into its regular place. The time is now set efficiently.
| Perform | Course |
|---|---|
|
Hour Adjustment |
Clockwise to extend, Counterclockwise to lower |
|
Minute Adjustment |
Clockwise to extend, Counterclockwise to lower |
| Button | Perform |
|---|---|
| Up Button | Enhance the hour or minute worth |
| Down Button | Lower the hour or minute worth |
| Mode Button | Change between “HR” (hour) and “MIN” (minute) modes |
Maintain the Up Button or Down Button to make the values change repeatedly, or press it repeatedly for incremental changes.
Saving the Time Zone
After adjusting the proper time zone, press the “ADJ” or “SET” button once more to avoid wasting the settings.
The watch will routinely change to the chosen time zone and show the proper time.
Adjusting for Daylight Saving Time
When Daylight Saving Time (DST) begins or ends, you may want to regulate your Armitron watch by one hour. This is how:
- Pull the crown out to the second click on.
- Flip the crown clockwise to advance the hour hand by one hour.
- Push the crown again in to the primary click on.
- Your watch is now set to the proper time for DST.
Extra Notes for DST Adjustment
- When DST begins within the spring, you may “spring ahead” by advancing the time by one hour.
- When DST ends within the fall, you may “fall again” by turning the time again by one hour.
- Not all nations observe DST. Test your native laws to find out if DST applies to your area.
- Some Armitron watches have an computerized DST adjustment function. In case your watch has this function, it is going to routinely modify the time for DST with none handbook intervention.
Setting the Stopwatch
To make use of the stopwatch operate, press the “Mode” button till the stopwatch icon seems on the show. The stopwatch will begin working instantly.
To cease the stopwatch, press the “Cease/Reset” button. To reset the stopwatch, press the “Cease/Reset” button once more.
To separate the stopwatch, press the “Break up/Reset” button. This can cease the stopwatch and file the present time as a break up time. To renew the stopwatch, press the “Break up/Reset” button once more.
Checking Break up Occasions
To test the break up occasions, press the “Mode” button till the “Break up” display screen seems. The break up occasions can be displayed in an inventory. To clear the break up occasions, press the “Cease/Reset” button.
| Button | Perform |
|---|---|
| Mode | Cycles by means of modes (time, stopwatch, alarm, timer) |
| Begin/Cease | Begins and stops the stopwatch |
| Reset | Resets the stopwatch |
| Break up | Information a break up time |
Utilizing the Alarm
To make use of the alarm, you will have to first set the time. To do that, press and maintain the “Mode” button till the “Alarm” icon seems on the show. Then, use the “Begin/Cease” and “Reset” buttons to set the hour and minute for the alarm. As soon as the time is ready, press the “Mode” button once more to avoid wasting the settings.
To activate the alarm, press the “Alarm On/Off” button. The alarm will sound on the set time and can proceed to sound for 20 seconds. To cease the alarm, press the “Begin/Cease” button.
It’s also possible to set the alarm to snooze. To do that, press the “Snooze” button when the alarm is sounding. The alarm will then sound once more in 10 minutes. You’ll be able to snooze the alarm as much as 9 occasions.
To show off the alarm fully, press the “Alarm On/Off” button once more.
Setting the Alarm Time
To set the alarm time, comply with these steps:
- Press and maintain the “Mode” button till the “Alarm” icon seems on the show.
- Use the “Begin/Cease” and “Reset” buttons to set the hour and minute for the alarm.
- Press the “Mode” button once more to avoid wasting the settings.
| Button | Perform |
|---|---|
| Begin/Cease | Units the hour and minute for the alarm. |
| Reset | Toggles between hour and minute setting. |
| Mode | Saves the settings and exits alarm mode. |
Setting the Blinking Indicator
To set the blinking indicator, comply with these steps:
1. Press and maintain the “Mode” button till the blinking indicator seems on the show.
2. Press the “Hour” button to pick the specified hour.
3. Press the “Minute” button to pick the specified minute.
4. Press the “Second” button to verify the time.
5. Press and maintain the “Mode” button to exit the time-setting mode.
6. The blinking indicator will now flash each second.
7. To show off the blinking indicator, press and maintain the “Begin/Cease” button for 3 seconds.
The blinking indicator is primarily designed for use in settings the place the consumer might have a visible indication of the passing time. For instance, it may be used to trace the remaining time throughout a exercise or to remind the consumer of an necessary occasion.
| Indicator Standing | Indication |
|---|---|
| Blinking | Signifies that the watch is within the time-setting mode or that the blinking indicator has been activated. |
| Not Blinking | Signifies that the watch is within the regular timekeeping mode or that the blinking indicator has been deactivated. |
Calibrating the Time
As soon as you’ve got set the time and date in your Armitron watch, you might have to calibrate it to make sure it stays correct. To calibrate the time:
- Press the “Mode” button till the timekeeping mode is displayed.
- Maintain down the “Regulate” button till the seconds begin flashing.
- Launch the “Regulate” button and instantly press it once more to zero the seconds.
- Use the “Ahead” or “Again” buttons to regulate the minutes and hours.
- As soon as the time is ready, maintain down the “Regulate” button for two seconds to avoid wasting the modifications.
- Press the “Mode” button to exit the timekeeping mode.
Superior Calibration (For analog watches solely):
- Observe steps 1-3 from the earlier directions.
- Maintain down the “Ahead” or “Again” button for five seconds to enter the superior calibration mode.
- The hour hand will transfer to the 12 o’clock place.
- Press the “Ahead” or “Again” button to regulate the hour hand.
- As soon as the hour hand is ready, press the “Regulate” button to maneuver to the minute hand.
- Use the “Ahead” or “Again” buttons to regulate the minute hand.
- As soon as the minute hand is ready, press the “Regulate” button to set the second hand.
- Press the “Mode” button to exit the superior calibration mode.
Be aware: In case your Armitron watch is a digital watch, you’ll not have the choice for superior calibration.
Resetting the Watch
In case your Armitron watch just isn’t displaying the proper time, you may reset it by following these steps:
- Find the reset button on the again of the watch.
- Use a paperclip or different small object to press and maintain the reset button for about 5 seconds.
- The watch will show “RESET” on the display screen.
- Press the reset button once more to verify the reset.
- The watch will now be reset to the manufacturing facility default settings.
9. Time Zones and Daylight Saving Time (DST)
If you’re touring to a distinct time zone, you may modify your watch’s time zone by following these steps:
| Time Zone | DST |
|---|---|
| Jap Time (ET) | Sure |
| Central Time (CT) | Sure |
| Mountain Time (MT) | Sure |
| Pacific Time (PT) | Sure |
| Alaska Time (AK) | No |
| Hawaii Time (HST) | No |
- Press and maintain the mode button (normally positioned on the facet of the watch) till the time zone mode is displayed.
- Use the up or down buttons to scroll by means of the time zones till the proper time zone is displayed.
- Press the mode button once more to verify the time zone change.
- If the watch is in DST mode, the DST indicator can be displayed on the display screen.
- To show DST on or off, press and maintain the DST button (normally positioned on the facet of the watch) till the DST indicator is displayed or hidden.
Time Adjustment
For analog watches, find the crown along with the watch and pull it out. Flip the crown clockwise to regulate the hour and minute fingers. It’s possible you’ll have to press the crown again in barely to regulate the second hand.
For digital watches, press and maintain the “Mode” or “Set” button till the time begins flashing. Use the “+” or “-” buttons to regulate the time. Press the “Mode” or “Set” button once more to avoid wasting the modifications.
Troubleshooting Timekeeping Points
1. The watch is working quick
- The watch could also be magnetized. To demagnetize it, place it on a wood desk and faucet it calmly with a hammer for a couple of minutes.
- The watch could also be soiled. Open the case and clear the motion with a mushy brush.
- The battery could also be weak. Substitute the battery.
2. The watch is working sluggish
- The watch could also be magnetized. To demagnetize it, place it on a wood desk and faucet it calmly with a hammer for a couple of minutes.
- The watch could also be soiled. Open the case and clear the motion with a mushy brush.
- The watch could have a free stability wheel. Take it to a watchmaker to have it repaired.
3. The second hand is leaping
- The watch could also be magnetized. To demagnetize it, place it on a wood desk and faucet it calmly with a hammer for a couple of minutes.
- The watch could also be soiled. Open the case and clear the motion with a mushy brush.
4. The watch just isn’t maintaining time
- The watch could also be magnetized. To demagnetize it, place it on a wood desk and faucet it calmly with a hammer for a couple of minutes.
- The watch could also be soiled. Open the case and clear the motion with a mushy brush.
- The battery could also be weak. Substitute the battery.
- The watch could have a damaged or broken motion. Take it to a watchmaker to have it repaired.
Find out how to Change Armitron Watch Time
1. Begin by pulling the crown outward to the primary click on. This can cease the second hand from shifting.
2. Flip the crown clockwise to maneuver the hour hand ahead. Flip it counterclockwise to maneuver the hour hand backward.
3. Pull the crown out to the second click on. This can can help you change the minute hand.
4. Flip the crown clockwise to maneuver the minute hand ahead. Flip it counterclockwise to maneuver the minute hand backward.
5. Push the crown again in to the primary click on. This can begin the second hand shifting once more.
6. Push the crown again in to the ultimate place. This can lock the crown in place.
Individuals Additionally Ask
How do I set the time on my Armitron digital watch?
Depress the small button under 6:00 to show the seconds. Press the underside button under 2:00 to clear the flashing seconds to 00. Press the crown to advance the hours and press the underside button under 2:00 to advance the minutes.
How do I modify the battery in my Armitron watch?
Flip the watch over and find the 4 small screws on the again of the case. Use a small screwdriver to take away the screws and elevate off the again of the case. Take away the outdated battery and insert the brand new battery, ensuring that the optimistic (+) facet of the battery is dealing with up. Substitute the again of the case and tighten the screws.
