Customizing your motorbike is an effective way to make it your individual and provides it a novel feel and look. If you happen to’re wanting so as to add a little bit little bit of consolation and magnificence to your Electra Glide Normal, putting in new hand grips is a fast and simple technique to do it. On this article, we’ll present you the way to set up new hand grips in your Electra Glide Normal, so you will get that excellent match and really feel whilst you’re using.
Earlier than you start, you may want to assemble just a few instruments and supplies. You will want a brand new set of hand grips, a Phillips head screwdriver, a flat head screwdriver, and a pair of pliers. You will additionally want some rubbing alcohol to wash the handlebars and the brand new hand grips. After getting your entire instruments and supplies, you can begin the set up course of.
Step one is to take away the previous hand grips. To do that, use the Phillips head screwdriver to take away the screws which might be holding the hand grips in place. As soon as the screws are eliminated, you should use the flat head screwdriver to pry the previous hand grips off of the handlebars. Watch out to not injury the handlebars while you’re doing this. As soon as the previous hand grips are eliminated, you’ll be able to clear the handlebars with rubbing alcohol to take away any grime or particles.
Gathering Supplies and Instruments
Earlier than embarking on the duty of putting in hand grips in your Electra Glide Normal, it is paramount to assemble the mandatory supplies and instruments to make sure a seamless course of.
The set up course of mandates the next supplies:
- New hand grips: Choose a pair of grips that align together with your preferences for fashion, consolation, and sturdiness.
- Throttle grip glue: Adhere the grips securely to the handlebars, stopping slippage and making certain a agency maintain.
- Zip ties: Securely fasten the wires throughout the handlebars, protecting them organized and shielded from potential injury.
The set up requires the next instruments:
| Software | Goal |
|---|---|
| Allen wrench | Loosening and tightening bolts or screws |
| Phillips head screwdriver | Eradicating and putting in screws |
| Flathead screwdriver | Prying open elements or loosening screws |
| Electrical tape | Insulating and defending electrical connections |
Getting ready the Handlebar
Earlier than putting in new hand grips in your Electra Glide Normal, it is important to organize the handlebar adequately. Comply with these steps to make sure a safe and comfy match:
2. Take away the Throttle Grip
- Find the throttle grip retaining screw: Discover the small screw on the facet of the throttle grip that holds it in place.
- Take away the screw: Utilizing a small screwdriver, rigorously take away the retaining screw with a delicate twisting movement.
- Grip the throttle grip firmly: With one hand, firmly grip the throttle grip.
- Twist the grip counterclockwise: Whereas holding the grip, twist it counterclockwise to loosen it from the handlebar.
- Pull the grip off: As soon as free, pull the throttle grip off the handlebar.
Extra Suggestions:
| Situation | Motion |
|---|---|
| If the throttle grip is caught | Spray a penetrating lubricant across the base of the grip and let it sit for a couple of minutes. Then, attempt twisting the grip once more. |
| If the retaining screw is broken | Exchange the screw with a brand new one of many identical dimension and thread sample. |
Making use of Glue or Adhesive
If you happen to select to make use of glue or adhesive to your Electra Glide Normal hand grips, observe these detailed steps:
1. Clear the Handlebar and Hand Grips
Clear each the handlebars and hand grips completely with isopropyl alcohol or the same cleaner to take away any grime or grease. Permit them to dry fully.
2. Apply a Skinny Layer of Adhesive
Apply a skinny, even layer of glue or adhesive to the within floor of the hand grips. Keep away from utilizing extreme adhesive, as it will probably intrude with the right set up.
3. Insert the Hand Grips with Precision
Rigorously insert the hand grips onto the handlebars, aligning them correctly. Use a delicate twisting movement to make sure a good distribution of adhesive. Maintain the grips in place for a couple of minutes to permit the adhesive to set.
4. Align and Regulate
As soon as the grips are safe, modify them to your most well-liked place. Be sure they’re aligned appropriately and there’s no slippage or motion.
5. Let the Adhesive Treatment
Permit the adhesive to treatment fully following the producer’s directions. This may take a number of hours or in a single day.
Here’s a desk summarizing the adhesives generally used for putting in hand grips on Electra Glide Normal bikes:
| Adhesive Sort | Really helpful Manufacturers |
|---|---|
| Cyanoacrylate (Tremendous Glue) | Loctite Tremendous Glue Gel, Gorilla Tremendous Glue |
| Epoxy | JB Weld, Permatex 5-Minute Epoxy |
| Bike Grip Adhesive | Movement Professional Grip Glue, Yamaha Grip Glue |
Putting in the Proper Hand Grip
Putting in the right-hand grip on an Electra Glide Normal requires precision and a spotlight to element. Comply with these steps to make sure a safe and comfy match:
1. Take away the Throttle Housing
Unscrew the throttle housing screws positioned on the handlebar. Rigorously pull the throttle housing in the direction of you to detach it from the handlebar.
2. Slide the Grip Off
Use a flathead screwdriver or a small pry bar to softly pry the right-hand grip off the handlebar. Watch out to not injury the handlebar or the grip.
3. Clear the Handlebar
Clear the handlebars completely with a degreaser or rubbing alcohol to take away any grime or particles. It will assist guarantee the brand new grip adheres correctly.
4. Set up the New Grip
Apply a small quantity of grip glue to the within of the brand new grip. Rigorously slide the grip onto the handlebar, ensuring it’s aligned correctly. Use a agency grip to press the grip into place. If needed, use a rubber mallet to faucet the grip securely into place. Wipe away any extra glue with a clear material.
Tip |
|---|
|
For a stronger bond, wrap the grip with electrical tape earlier than putting in it. It will assist forestall it from slipping. |
Putting in the Left Hand Grip
The left hand grip is put in in the same method to the proper hand grip, however there are just a few key variations.
1. Take away the previous grip
Utilizing a pointy knife or razor blade, rigorously lower the previous grip away from the handlebar. Watch out to not lower the wires or cables that run below the grip.
2. Clear the handlebar
Use a clear material and solvent to wash the handlebar the place the brand new grip might be put in. It will take away any grime or grease that would forestall the grip from adhering correctly.
3. Apply adhesive to the handlebar
Apply a skinny layer of adhesive to the handlebar the place the brand new grip might be put in. You need to use any kind of adhesive that’s designed to be used on metallic, similar to epoxy or tremendous glue.
4. Slide on the brand new grip
Slide the brand new grip onto the handlebar and align it with the previous grip. Ensure that the grip is totally seated on the handlebar and that there are not any gaps between the grip and the handlebar.
5. Safe the grip
Clamp the ends of the grip tightly with a pair of pliers and maintain them for a couple of minutes to permit the adhesive to set. It’s also possible to use a warmth gun to hurry up the drying course of. As soon as the adhesive has set, take away the pliers and trim any extra adhesive from across the edges of the grip.
| Instruments and supplies wanted | Makes use of |
|---|---|
| Sharp knife or razor blade | To chop away the previous grip |
| Clear material and solvent | To wash the handlebar |
| Adhesive | To safe the brand new grip to the handlebar |
| Pliers | To clamp the ends of the grip |
| Warmth gun (optionally available) | To hurry up the drying course of |
Tightening and Adjusting the Grips
To make sure the grips are securely fixed and comfy, observe these steps:
1. Examine the Throttle Housing
Verify the throttle housing for any injury or irregularities. If it is broken, substitute it earlier than continuing.
2. Lubricate the Grip
Apply a small quantity of lubricant to the within of the grip. It will assist it slide on easily.
3. Slide on the Grip
Gently slide the grip onto the throttle housing, ensuring it is aligned correctly.
4. Tighten the Clamp
Find the clamp on the throttle housing and tighten it evenly utilizing the supplied Allen or Torx key. Don’t overtighten.
5. Verify the Throttle Cable
Make sure the throttle cable has sufficient slack to permit for full throttle operation. Regulate the cable pressure if needed.
6. Grip Positioning
Place the grips in a cushty and pure place. Regulate them in order that your wrists are in a impartial place when gripping the handlebars. Use the next ideas:
- For many riders, the grips must be barely angled inwards.
- Regulate the angle of the grips by rotating them on the throttle housing.
- Take a look at experience the motorbike to make sure the grip place is comfy throughout acceleration and deceleration.
Closing Touches
As soon as the grips are put in securely, give them a remaining wipe down with a clear material to take away any fingerprints or smudges.
Verify the throttle meeting to make sure it operates easily and with none binding. Regulate the throttle cable if needed.
Tighten any free screws or bolts and examine the general fitment of the grips.
Enhancing Grip Consolation
To additional improve grip consolation, think about the next ideas:
9. Vibration Dampening:
Putting in grip dampeners can considerably scale back vibration transmitted to the rider’s arms. These dampeners take in street imperfections and engine vibrations, offering a extra comfy using expertise.
| Sort | Options |
|---|---|
| Bar-end weights | Weighted ends of the handlebars that take in vibrations |
| Gel inserts | Silicone or rubber inserts that match contained in the grips, offering cushioning |
| Vibration-isolating grips | Specifically designed grips with inner damping mechanisms |
Upkeep Suggestions for Lengthy-Lasting Hand Grips
1. **Clear repeatedly.** Dust and dirt can construct up readily available grips over time, making them slippery and uncomfortable to make use of. To wash your hand grips, merely wipe them down with a humid material. It’s also possible to use a gentle cleaning soap answer if needed.
2. **Hold them dry.** Moisture could cause hand grips to deteriorate prematurely. In case your hand grips get moist, dry them off as quickly as attainable. It’s also possible to use a hair dryer on a low setting to hurry up the drying course of.
3. **Shield them from the weather.** Publicity to daylight and excessive temperatures can injury hand grips. To guard your hand grips, hold them coated when not in use. It’s also possible to use a UV protectant spray to assist forestall fading.
4. **Examine repeatedly.** Hand grips can put on out over time, so it is vital to examine them repeatedly for indicators of injury. If you happen to see any cracks, tears, or different injury, substitute your hand grips instantly.
5. **Use the proper dimension.** Hand grips are available in a wide range of sizes, so it is vital to decide on the proper dimension to your arms. In case your hand grips are too small, they are going to be uncomfortable to make use of. If they’re too giant, they are going to be troublesome to regulate.
6. **Set up correctly.** Hand grips should be put in correctly with the intention to operate correctly. If you’re not sure about the way to set up hand grips, seek the advice of a professional mechanic.
7. **Use gloves.** Carrying gloves while you experience can assist defend your hand grips from grime, grime, and put on and tear.
8. **Keep away from utilizing harsh chemical compounds.** Harsh chemical compounds can injury hand grips. If you should clear your hand grips, use a gentle cleaning soap answer as a substitute.
9. **Retailer correctly.** When you find yourself not utilizing your motorbike, retailer it in a cool, dry place. It will assist to forestall your hand grips from deteriorating.
10. **Exchange when needed.** Hand grips will ultimately put on out and should be changed. If you happen to discover any indicators of injury, or in case your hand grips are now not comfy to make use of, it is time to substitute them.
How To Set up Hand Grips Electra Glide Normal
Putting in hand grips in your Electra Glide Normal is a comparatively easy course of that may be accomplished in a couple of minutes. Listed here are the steps you should observe:
- Take away the previous hand grips. To do that, use a small screwdriver or a pair of needle-nose pliers to rigorously pry the grips off the handlebars. Watch out to not injury the handlebars.
- Clear the handlebars. As soon as the previous grips are eliminated, use a clear material to wipe down the handlebars. It will take away any grime or particles that would intrude with the set up of the brand new grips.
- Apply adhesive to the handlebars. Apply a skinny layer of adhesive to the handlebars. It will assist to maintain the brand new grips in place.
- Slide the brand new grips onto the handlebars. Rigorously slide the brand new grips onto the handlebars. Ensure that the grips are aligned appropriately and that they’re totally seated on the handlebars.
- Tighten the grips. Use a small screwdriver or a pair of pliers to tighten the grips on the handlebars. Watch out to not overtighten the grips, as this might injury the grips or the handlebars.
Folks Additionally Ask
How do I take away the throttle grip on my Electra Glide Normal?
To take away the throttle grip in your Electra Glide Normal, use a small screwdriver or a pair of needle-nose pliers to rigorously pry the grip off the handlebars. Watch out to not injury the handlebars or the throttle grip.
How do I set up heated hand grips on my Electra Glide Normal?
To put in heated hand grips in your Electra Glide Normal, you will want to buy a heated hand grip package. After getting the package, observe the directions supplied within the package to put in the heated hand grips.
How do I clear the hand grips on my Electra Glide Normal?
To wash the hand grips in your Electra Glide Normal, use a clear material and a gentle cleaning soap answer. Wipe down the hand grips with the cleaning soap answer after which rinse them with clear water. Permit the hand grips to dry fully earlier than utilizing them.
