Eradicating a camper awning could be a daunting activity, nevertheless it would not must be. With the best instruments and somewhat persistence, you may take away your awning rapidly and simply.
Earlier than you start, be sure to have all the required instruments. You will want a ladder, a screwdriver, a wrench, and a pair of pliers. You might also need to have a helper available to help you.
Upon getting gathered your instruments, start by eradicating the screws that maintain the awning arms to the camper. Subsequent, take away the bolts that maintain the awning curler to the camper. As soon as the bolts are eliminated, you may rigorously elevate the awning curler off the camper. Watch out to not injury the curler or the awning material.
Collect Needed Instruments and Supplies
To make sure a easy and environment friendly camper awning removing course of, it’s essential to collect the required instruments and supplies beforehand. Here is a complete record to information your preparation:
Instruments:
| Device | Function |
|---|---|
| Adjustable Wrench or Socket Set | Loosening and tightening bolts and nuts |
| Phillips and Flathead Screwdriver Set | Eradicating screws that maintain awning elements in place |
| Utility Knife | Reducing awning material and cordage |
| Hammer | Tapping gently to launch caught elements |
| Pliers | Gripping and pulling material and cordage |
Supplies:
| Materials | Function |
|---|---|
| Awning Cloth Cleaner | Cleansing awning material earlier than storage |
| UV Protectant Spray | Defending awning material from solar injury throughout storage |
| Awning Storage Case | Storing awning material and elements neatly and securely |
Retract and Safe the Awning
Comply with these steps to retract and safe the awning as a part of the removing course of:
1. Retract the Awning
a. Be sure that the awning arms are straight, parallel to the camper, and never angled outwards or inwards.
b. Slowly use the pull strap or swap to retract the awning.
c. Guarantee the material has rolled up evenly on the curler tube.
d. When totally retracted, safe it with a strap or bungee twine.
2. Safe the Awning
a. Examine the awning material for any tears, holes, or unfastened seams. Restore any injury earlier than securing.
b. Fold the aspect flaps of the awning material towards the curler tube, defending the material from flapping within the wind.
c. Wrap the top flaps of the awning material across the curler tube, overlapping them barely to maintain moisture out.
d. Safe the awning material to the curler tube utilizing Velcro straps or a wrap-around cowl.
e. Tighten any unfastened bolts, nuts, or screws that maintain the awning in place.
3. Clear the Awning
a. Use a comfortable material or sponge and a gentle cleaning soap resolution to wipe down the awning material.
b. Rinse completely with clear water and permit to dry.
c. Apply a UV protectant spray to assist forestall fading and injury from the solar.
| Instruments and Supplies Wanted |
|---|
|
|
By following these steps, you may retract and safe the camper awning correctly to guard it from injury throughout storage or transportation.
Take away the Truss Arms
The truss arms are the steel rods that reach from the awning curler to the highest of the awning. They help the load of the awning and hold it from sagging.
To take away the truss arms, you will have to:
- Find the truss arm mounting brackets on the aspect of the RV.
- Loosen the bolts that maintain the mounting brackets in place.
- Take away the truss arms from the mounting brackets.
- Repeat steps 1-3 for the opposite truss arm.
Ideas for Eradicating the Truss Arms
* Watch out to not injury the awning material when you’re eradicating the truss arms.
* If the bolts are rusted or caught, you need to use a penetrating oil to loosen them.
* In case you are having issue eradicating the truss arms, you may contact a certified RV technician for help.
WARNING: Earlier than eradicating the truss arms, be sure that the awning is totally retracted. Failure to take action may end in severe damage or injury to the awning.
| Instruments Wanted |
|---|
| Socket wrench |
| Screwdriver |
| Penetrating oil (elective) |
Take away the Awning Curler
Eradicating the awning curler entails a couple of extra steps:
- Help the awning material: Loosen the material rigidity by winding within the awning about midway. It will scale back the load on the curler.
- Disconnect the ability: If the awning is motorized, disconnect the ability supply on the electrical panel or circuit breaker.
- Take away the top caps: On all sides of the curler, you may discover finish caps that safe the material and curler. Take away these caps utilizing a screwdriver or wrench.
- Slide out the curler: With the top caps eliminated, now you can slide the curler out of the awning tube. Watch out to not injury the material or curler as you accomplish that.
| Step | Motion |
|---|---|
| 1 | Loosen the material rigidity |
| 2 | Disconnect the ability (if motorized) |
| 3 | Take away the top caps |
| 4 | Slide out the curler |
Detach the Awning Cloth
Now that the awning arms are indifferent, you may take away the awning material. Begin by unhooking the material from the curler tube. There are often a number of hooks or clips that maintain the material in place. As soon as the material is unhooked, rigorously roll it up and safe it with a strap or bungee twine.
Eradicating the Awning Cloth
| Step | Motion |
|---|---|
| 1 | Unhook the material from the curler tube. |
| 2 | Fastidiously roll up the material. |
| 3 | Safe the material with a strap or bungee twine. |
Take away the Fascia and Drip Rail
The fascia is the vertical trim piece that runs alongside the highest of the awning. It’s sometimes held in place by screws or bolts. The drip rail is the smaller trim piece that runs alongside the underside of the fascia. It’s sometimes held in place by screws or adhesive tape.
To take away the fascia and drip rail, observe these steps:
- Find the screws or bolts that maintain the fascia in place. These are sometimes positioned alongside the highest fringe of the fascia.
- Take away the screws or bolts.
- Gently pry the fascia away from the RV. It might be useful to make use of a putty knife or different skinny object to assist pry the fascia unfastened.
- As soon as the fascia is eliminated, you may take away the drip rail. The drip rail is usually held in place by screws or adhesive tape.
- If the drip rail is held in place by screws, take away the screws.
- If the drip rail is held in place by adhesive tape, use a warmth gun or hair dryer to warmth the tape till it turns into comfortable. As soon as the tape is comfortable, you may gently pry the drip rail away from the RV.
| Screw or Bolt Measurement | Amount | Location |
|---|---|---|
| 1/4″ x 1″ | 4 | High fringe of fascia |
| #8 x 1-1/2″ | 6 | Backside fringe of drip rail |
Seal the Opening
As soon as the awning is eliminated, the opening within the RV wall must be sealed to stop water and pests from getting into. This may be completed with a wide range of supplies, together with silicone caulk, butyl tape, or a mixture of each.
Supplies Wanted:
| Materials | Function |
|---|---|
| Silicone caulk | Seals gaps and cracks |
| Butyl tape | Creates a weather-tight barrier |
| Caulk gun | Dispenses caulk |
| Butyl tape curler | Applies butyl tape evenly |
Steps:
1. Clear the opening across the perimeter of the awning tube.
2. Apply a bead of silicone caulk across the opening.
3. Roll out a strip of butyl tape over the caulk, guaranteeing it overlaps the caulk by at the very least 1 inch on all sides.
4. Use a caulk gun to use a second bead of silicone caulk over the butyl tape.
5. Easy out the caulk utilizing a finger or a caulk ending instrument.
6. Permit the caulk to remedy in accordance with the producer’s directions.
7. Double-check the seal for any gaps or cracks, and apply extra caulk or butyl tape as wanted.
Examine and Clear the Eliminated Parts
Examine the Cloth
Unfold the awning material and examine it completely for any injury, resembling tears, holes, or stains. For those who discover any injury, mark it with a bit of tape or chalk so you may restore it later.
Clear the Cloth
Use a light cleaning soap resolution and a comfortable brush to scrub the material. Keep away from utilizing harsh detergents or bleach, as these can injury the fabric. Rinse the material completely with clear water and permit it to air dry.
Examine the Body
Examine the awning body for any indicators of injury, resembling rust, corrosion, or bending. For those who discover any injury, you will need to restore it earlier than reassembling the awning.
Clear the Body
Use a light cleaning soap resolution and a comfortable brush to scrub the body. Pay particular consideration to the areas the place the material attaches to the body, as these areas usually tend to accumulate filth and particles. Rinse the body completely with clear water and permit it to air dry.
Examine the Arms and Brackets
Examine the awning arms and brackets for any indicators of injury, resembling bent or damaged elements. For those who discover any injury, you will need to exchange the affected elements earlier than reassembling the awning.
Clear the Arms and Brackets
Use a light cleaning soap resolution and a comfortable brush to scrub the arms and brackets. Pay particular consideration to the areas the place the arms connect to the body and the brackets connect to the RV, as these areas usually tend to accumulate filth and particles. Rinse the arms and brackets completely with clear water and permit them to air dry.
Examine the Drive Motor
In case your awning is supplied with a drive motor, examine the motor for any indicators of injury, resembling unfastened connections or defective wiring. For those who discover any injury, you will need to restore or exchange the motor earlier than reassembling the awning.
Clear the Drive Motor
Use a comfortable material to scrub the outside of the drive motor. Keep away from utilizing water or every other liquids, as these can injury the motor. If the motor is especially soiled, you need to use a vacuum cleaner to take away any unfastened filth and particles.
Lubricate Transferring Elements
Common lubrication is essential for sustaining the sleek operation of your camper awning. Making use of lubricant to the shifting elements helps scale back friction and prevents untimely put on or injury. Here is an in depth information to lubricating the shifting elements of your camper awning:
Instruments and Supplies
| Merchandise | Amount |
|---|---|
| Silicone-based lubricant spray | 1 can |
| Clear material | 1 |
Steps
-
Clear the shifting elements: Begin by cleansing the awning’s arms, joints, and pulleys with a humid material to take away any filth or particles which will have collected. Permit the elements to dry utterly earlier than lubricating.
-
Determine the lubrication factors: Find the shifting joints the place friction is prone to happen, such because the hinge factors of the awning arms and the pulleys that information the awning material.
-
Apply lubricant: Shake the lubricant can completely earlier than use. Spray a light-weight coat of lubricant onto every lubrication level, guaranteeing the lubricant penetrates the joints and pulleys. Keep away from over-lubricating, as this will entice filth and particles.
-
Wipe away extra: Use a clear material to wipe away any extra lubricant which will have dripped or leaked out. This helps forestall filth from sticking to the lubricated elements.
-
Lubricate commonly: Repeat the lubrication course of each few months or extra incessantly in case your awning is used incessantly or uncovered to harsh climate situations. Common lubrication will extend the lifetime of your awning and hold it working easily.
Reinstall the Awning
To reinstall the awning, merely reverse the removing steps.
.
1. Insert the alternative finish of the awning into the curler tube.
2. Roll up the awning and safe it with the strap or twine.
3. Align the awning tube with the mounting brackets and slide it into place.
4. Tighten the bolts or screws to safe the awning.
5. Connect the help arms to the awning tube and prolong them outwards.
6. Regulate the help arms to stage the awning.
7. Connect the top caps to the awning tube.
8. Join the awning material to the help arms and safe it with the material clamps.
9. Roll out the awning and prolong it to its desired size.
10. Prolong the awning legs to help the awning and alter the peak as wanted.
| Bolt/Screw Measurement | Tightening Torque |
|---|---|
| 1/4″ | 10-15 ft-lbs |
| 5/16″ | 15-20 ft-lbs |
| 3/8″ | 20-25 ft-lbs |
| 1/2″ | 25-30 ft-lbs |
How To Take away Camper Awning
Eradicating a camper awning could be a daunting activity, nevertheless it’s truly fairly easy when you observe the steps beneath. First, you may want to collect your instruments. You will want a ladder, a socket wrench or drill, and a helper.
Upon getting your instruments, you can begin eradicating the awning. First, climb up the ladder and unhook the awning from the curler tube. Watch out to not drop the awning, as it may be heavy.
Subsequent, take away the bolts that maintain the curler tube to the camper. You should definitely help the curler tube as you take away the bolts, as it may be heavy.
As soon as the curler tube is eliminated, you may take away the awning material. Begin by unhooking the material from the curler tube. Then, fold up the material and retailer it in a protected place.
Lastly, you may take away the awning arms. Begin by eradicating the bolts that maintain the arms to the camper. Then, rigorously take away the arms. Watch out to not injury the camper as you take away the arms.
Individuals Additionally Ask About How To Take away Camper Awning
How do you take away a slide out awning?
To take away a slide out awning, you may have to observe the steps beneath:
1. Retract the awning all the best way into the housing.
2. Unbolt the mounting brackets from the slide out.
3. Fastidiously elevate the awning straight up and off of the mounting brackets.
4. Retailer the awning in a protected place.
How do you take away a retractable awning?
To take away a retractable awning, you may have to observe the steps beneath:
1. Retract the awning all the best way into the housing.
2. Take away the screws that maintain the housing to the wall.
3. Fastidiously elevate the housing straight up and off of the wall.
4. Disconnect {the electrical} wires from the motor.
5. Retailer the awning in a protected place.
How do you take away a window awning?
To take away a window awning, you may have to observe the steps beneath:
1. Take away the screws that maintain the awning to the window body.
2. Fastidiously elevate the awning straight up and off of the window body.
3. Retailer the awning in a protected place.
