Renovating your kitchen could be a daunting process, particularly with regards to eradicating giant home equipment like wall microwaves. These items are sometimes heavy and could be tough to maneuver, to not point out {the electrical} wiring and security hazards concerned. Nevertheless, with the correct instruments and just a little know-how, you possibly can safely and effectively take away a wall microwave and clear the best way for a contemporary new look.
Earlier than you begin, be sure to have the mandatory instruments available. You will want a screwdriver, a drill, a pair of pliers, and a ladder or step stool. If the microwave is wired straight into the wall, you may additionally want a voltage tester and wire cutters. Upon getting your instruments assembled, it is time to get began. First, flip off the ability to the microwave on the circuit breaker or fuse field. This can stop any electrical shocks or accidents throughout the elimination course of.
Subsequent, take away the screws that maintain the microwave in place. These screws are usually situated on the highest and backside of the unit. As soon as the screws are eliminated, rigorously carry the microwave off the wall and set it apart. Watch out to not drop or harm the unit. If the microwave is wired straight into the wall, you will want to disconnect the wires earlier than you possibly can take away it fully. Use a voltage tester to ensure the wires usually are not dwell earlier than touching them. As soon as the wires are disconnected, you possibly can safely take away the microwave from the wall.
Security Precautions
Basic Pointers
* All the time disconnect the microwave from {the electrical} outlet earlier than making an attempt any repairs or changes.
* By no means function the microwave with the door open or broken. This may trigger dangerous radiation and electrical shock.
* Keep away from touching the metallic casing or inside components of the microwave, as they could be sizzling.
* Permit the microwave to chill fully earlier than making an attempt to take away it from the wall.
* Use correct lifting methods to keep away from harm. If the microwave is especially heavy, it’s endorsed to hunt help from one other particular person.
Particular Precautions for Over-the-Vary Microwaves
* Pay attention to any supporting brackets or screws that could be holding the microwave in place. These needs to be eliminated rigorously to forestall harm to the equipment or the wall.
* If the microwave is vented to the skin, be certain that the vent hose is disconnected and sealed correctly.
* Test for any wires or cables that could be related to the microwave. These needs to be rigorously indifferent and labeled for straightforward reattachment later.
Further Suggestions
* It’s useful to have a second particular person current to help with the elimination course of, particularly if the microwave is giant or heavy.
* Use a flashlight or headlamp to light up the work space, particularly if the work is being achieved in a confined house.
* Take your time and be affected person. Eradicating a wall microwave could be difficult, however with correct precautions and cautious execution, it may be achieved safely and successfully.
Gathering Essential Instruments
Security Gear
Earlier than commencing any work, guarantee your security. Put on protecting gloves, security glasses, and a mud masks to forestall harm from sharp edges or particles.
Important Instruments
- Cordless drill or screwdriver
- Drill bits or screw bits
- Stud finder
- Stage
- Socket wrench or adjustable wrench
Optionally available Instruments
Relying on the particular microwave set up, you may additionally want the next instruments:
| Device | Goal |
|---|---|
| Wire cutters | For reducing electrical wires |
| Voltage tester | To make sure electrical security |
| Caulk gun and caulk | For sealing gaps across the microwave |
| Utility knife | For reducing insulation or wires |
Really helpful Supplies
Along with instruments, you may additionally want the next supplies:
- New screws or bolts (if vital)
- Electrical tape
- Electrical wire nuts
- Mounting bracket (if the present one is broken)
Disconnecting the Energy Provide
To disconnect the ability provide to your wall microwave, observe these steps:
1. Flip off the circuit breaker or fuse
Find {the electrical} panel on your dwelling and establish the circuit breaker or fuse that controls the ability to the microwave. Flip off the breaker or take away the fuse.
2. Unplug the microwave
Disconnect the microwave’s energy wire from {the electrical} outlet.
3. Take away the mounting bolts
Most wall microwaves are mounted to a wall bracket utilizing two or 4 bolts. These bolts are usually situated on the high and backside of the microwave. Use a wrench or socket to take away the bolts, however watch out to not drop the microwave.
If the bolts are tough to take away, chances are you’ll want to make use of a penetrating lubricant or apply downward stress to the microwave whereas unscrewing the bolts.
As soon as the bolts are eliminated, the microwave could be rigorously lifted off the wall bracket.
Eradicating the Mounting Bracket
Upon getting disconnected the ability and eliminated the trim equipment, you possibly can start eradicating the mounting bracket. Here is an in depth step-by-step information:
- Find the Mounting Screws: Sometimes, the mounting bracket is secured to the wall with two or 4 screws. Search for them on the highest and/or backside of the bracket.
- Take away the Screws: Utilizing a screwdriver or drill, rigorously take away the screws. Ensure to carry the microwave regular as you do that.
- Raise the Microwave Off the Bracket: With the screws eliminated, gently carry the microwave straight as much as detach it from the bracket. Be cautious to not let it swing or drop.
- Disconnect the Wiring from the Bracket: Generally, there will probably be a wiring harness connecting the microwave to the bracket. Disconnect this harness by urgent the discharge tab or unscrewing the connector. Word the situation of the wires for reassembly.
| Essential Security Word: |
|---|
| All the time disconnect the ability provide earlier than eradicating the mounting bracket to forestall electrical shock or different hazards. |
Detaching the Microwave from the Wall
As soon as you’ve got disconnected the microwave from the ability provide, it is time to detach it from the wall. This course of will range relying on the kind of mounting bracket used. Listed here are the final steps for every sort:
| Mounting Bracket Kind | Detachment Steps |
|---|---|
| French Cleat |
Gently carry the microwave straight as much as disengage it from the cleat on the wall. Don’t pull the microwave ahead or backward, as this might harm the cleat or the microwave. |
| Bracket with Screws |
Use a screwdriver or drill to take away the screws that safe the microwave to the bracket. As soon as the screws are eliminated, rigorously carry the microwave off the bracket. |
| Wall-Mounted Cupboard |
If the microwave is mounted inside a wall-mounted cupboard, you will want to take away the cupboard from the wall earlier than you possibly can detach the microwave. |
As soon as the microwave is indifferent from the wall, rigorously carry it down and place it on a steady floor. You’ll want to assist the underside of the microwave with one hand whereas lifting it with the opposite.
Reducing the Microwave Fastidiously
Upon getting disconnected the microwave from the ability supply and eliminated the mounting bracket, it is time to rigorously decrease the microwave from the wall.
1. Get Assist
For bigger microwaves, enlist the assistance of a pal or member of the family to help you in reducing it.
2. Maintain the Microwave Securely
Place your self in entrance of the microwave and grasp it firmly with each arms. Make sure that your grip is safe and balanced.
3. Decrease Slowly and Gently
Fastidiously decrease the microwave in direction of the ground, sustaining a gentle and managed movement. Don’t drop or jolt the microwave at any time.
4. Assist the Microwave
In case you are unable to decrease the microwave fully to the ground, place a sturdy field or desk beneath it to assist its weight.
5. Clear the Method
Earlier than reducing the microwave, be certain that the trail to the ground is obvious of any obstacles or tripping hazards.
6. Tilt and Take away
If the microwave is near the ground however not fairly touching it, rigorously tilt it ahead and pull it away from the wall. This step requires further care to forestall any harm or harm.
| Step | Description |
|---|---|
| 1 | Flip off breaker |
| 2 | Take away faceplate |
| 3 | Unscrew mounting bracket |
| 4 | Disconnect wiring |
| 5 | Decrease microwave |
| 6 | Tilt and take away |
Eradicating the Again Cowl
Earlier than you begin, collect your instruments and supplies. You will want a Phillips head screwdriver, a flathead screwdriver, and a pair of needle-nose pliers. You may additionally want a flashlight that will help you see contained in the microwave.
Upon getting your instruments and supplies, observe these steps to take away the again cowl of your microwave:
1. Unplug the microwave from the wall outlet.
2. Take away the screws which are holding the again cowl in place. These screws are usually situated on the highest and backside of the again cowl.
3. Fastidiously carry the again cowl off the microwave. Watch out to not harm the wires or different parts contained in the microwave.
4. Set the again cowl apart in a secure place.
| High 5 Microwave Manufacturers | Market Share |
|---|---|
| Samsung | 25% |
| LG | 20% |
| Whirlpool | 15% |
| GE | 12% |
| KitchenAid | 10% |
5. Examine the within of the microwave for any harm. In case you see any harm, don’t use the microwave. Contact a professional restore technician instantly.
6. If the within of the microwave seems to be okay, you possibly can proceed with the following step.
7. Find the capacitor. The capacitor is a big, cylindrical part that’s usually situated on the left aspect of the microwave. It’s normally coated by a plastic or metallic casing.
8. Fastidiously discharge the capacitor. To do that, use a pair of needle-nose pliers to the touch the 2 terminals on the capacitor. You will notice a spark when the capacitor discharges.
Disconnecting Inside Wires
7. Establish and Disconnect the Energy Wire: Find the thick, insulated wire related to the circuit breaker. That is the ability wire. Grip the wire with insulated pliers and pull it straight out of the terminal block.
8. Disconnect the Different Wires: Across the energy wire, you will discover smaller wires of various colours. These are the bottom, impartial, and management wires. Observe these steps to disconnect them:
- Impartial Wire (White): Grip the white wire with pliers and pull it straight out of the impartial terminal block.
- Floor Wire (Inexperienced or Naked Copper): Grip the inexperienced or naked copper wire with pliers and pull it straight out of the bottom terminal block.
- Management Wires: These wires are normally black, pink, or yellow. They hook up with the management panel of the microwave. Establish the terminal blocks the place they join and pull every wire straight out.
9. Wrap and Safe the Wires: As soon as all of the wires are disconnected, wrap them along with electrical tape to forestall any electrical shorts. Safe the wires out of the best way utilizing zip ties or wire clips.
| Wire Kind | Terminal Block Colour |
|---|---|
| Energy | Crimson/Black |
| Impartial | White |
| Floor | Inexperienced/Naked Copper |
| Management | Varies (Black, Crimson, Yellow) |
Eradicating the Magnetron and Transformer
9. Disconnecting the Electrical Connections
As soon as the magnetron and transformer are uncovered, you will have to disconnect {the electrical} connections. These connections will range relying on the particular mannequin of microwave you’ve, however they will usually contain a couple of screws or terminals.
To disconnect {the electrical} connections, observe these steps:
- Establish {the electrical} connections on the magnetron and transformer.
- Use a screwdriver to take away the screws or terminals that safe the connections.
- Gently pull the wires away from the magnetron and transformer. Watch out to not harm the wires.
As soon as {the electrical} connections are disconnected, you possibly can take away the magnetron and transformer from the microwave.
| Kind of Connection | The right way to Disconnect |
|---|---|
| Screw terminal | Use a screwdriver to take away the screw. |
| Push-on terminal | Gently pull the wire away from the terminal. |
| Soldered connection | Use a soldering iron to soften the solder and disconnect the wires. |
Disconnect the Microwave
Earlier than you start, disconnect the microwave from the ability outlet. This can stop any electrical shocks or harm to the microwave.
Take away the Mounting Screws
Find the screws that mount the microwave to the wall. These are usually situated on the highest and backside of the microwave. Take away the screws utilizing a screwdriver.
Raise the Microwave
Grip the microwave firmly on each side. Raise the microwave straight up and off the wall. Watch out to not harm the wall or the microwave.
Decrease the Microwave
Decrease the microwave to a desk or countertop. Don’t drop the microwave, as this might harm it.
Clear the Wall
Use a humid fabric to wash the wall the place the microwave was mounted. This can take away any mud or particles which will have collected.
Clear the Microwave
Clear the microwave totally earlier than utilizing it once more. This can take away any meals residue or grease which will have collected.
Safely Disposing of the Microwave
Test Native Rules
Test along with your native waste administration authority for directions on the best way to get rid of a microwave oven. Some localities have particular necessities for the disposal of digital waste.
Contact a Recycling Middle
Contact a neighborhood recycling middle to see in the event that they settle for microwaves. Some recycling facilities specialize within the recycling of digital waste.
Contact the Producer
Contact the producer of your microwave to see if they’ve any recycling or disposal packages. Some producers supply packages for the secure disposal of their merchandise.
Use a Waste Disposal Service
Contact a waste disposal service that makes a speciality of the disposal of digital waste. These companies will usually cost a charge for his or her companies.
| Disposal Technique | Execs | Cons |
|---|---|---|
| Native waste administration authority | Usually free | Could have particular necessities |
| Recycling middle | Recycles supplies | Could not settle for all microwaves |
| Producer | Could have recycling packages | Is probably not handy |
| Waste disposal service | Handy | Sometimes prices a charge |
The right way to Take away a Wall Microwave
To take away a wall microwave, observe these steps:
1.
Flip off the ability to the microwave on the circuit breaker.
2.
Open the microwave door and take away the turntable and another detachable components.
3.
Find the screws which are holding the microwave to the wall and take away them.
4.
Fastidiously pull the microwave away from the wall, being cautious to not harm {the electrical} wire.
5.
Disconnect {the electrical} wire from the wall outlet.
6.
Take away the microwave from the mounting bracket.
Individuals Additionally Ask
How do I take away a microwave that’s constructed into a cupboard?
To take away a microwave that’s constructed into a cupboard, observe these steps:
1.
Open the microwave door and take away the turntable and another detachable components.
2.
Find the screws which are holding the microwave to the cupboard and take away them.
3.
Fastidiously pull the microwave away from the cupboard, being cautious to not harm {the electrical} wire.
4.
Disconnect {the electrical} wire from the wall outlet.
5.
Take away the microwave from the mounting bracket.
How do I take away a microwave that’s hanging on a bracket?
To take away a microwave that’s hanging on a bracket, observe these steps:
1.
Flip off the ability to the microwave on the circuit breaker.
2.
Open the microwave door and take away the turntable and another detachable components.
3.
Find the screws which are holding the microwave to the bracket and take away them.
4.
Fastidiously pull the microwave away from the bracket, being cautious to not harm {the electrical} wire.
5.
Disconnect {the electrical} wire from the wall outlet.
6.
Take away the microwave from the wall.
